1.1 These Terms and Conditions (Terms) apply to the sale and use of the REVVGAUGE Gauge Unit V1.0 by REVVGAUGE PTY LTD, trading as Revv Gauge (Revv Gauge, we, us, our).

1.2 By placing an order, completing a purchase, installing, configuring, or using the Product, you (you, Purchaser, Customer) agree to be bound by these Terms.

1.3 If you do not agree to these Terms, you must not purchase, install, or use the Product.

1.4 These Terms should be read together with the separate REVVGAUGE Gauge Unit V1.0 Product Warranty (Warranty). Where there is any inconsistency between these Terms and the Warranty in respect of warranty remedies, the Warranty prevails for that subject matter, subject always to the Australian Consumer Law.

2.1 The Product is a general-purpose multifunction 52 mm programmable digital gauge (Model RVG-52), supplied as a complete assembled unit together with any Revv Gauge accessories included at the time of purchase (such as a wiring loom and mounting hardware, if supplied).

2.2 The Product is intended as a configurable information display and data interface for applications such as off-grid homes, off-road vehicles, caravans, industrial equipment, and similar 12–24 V systems. Exact software features may vary by firmware version.

2.3 V1.0 interface note: Connector pins 3 and 4 are additional analog inputs (AIN5 and AIN6). This revision does not include a K-type thermocouple interface. Connecting a thermocouple directly to pins 3 or 4 is not supported and may damage the unit.

2.4 Separately purchased sensors, third-party components, and accessories not included with the Product are not covered by these Terms except as expressly stated at the time of purchase.

3.1 The Product is designed and sold for non-road and off-grid applications as described in these Terms.

3.2 Without limiting clause 3.1, the Product is intended for use as a supplementary instrumentation display in off-grid homes, caravans, off-road vehicles, motorsport and competition vehicles, agricultural machinery, industrial equipment, and similar non-road or stationary applications operating from a nominal 12 V to 24 V DC supply.

3.4 The Product is an informational accessory. Readings, alerts, outputs, and displayed values may be incomplete, delayed, inaccurate, or unavailable due to sensor fault, wiring fault, configuration error, electrical noise, CAN bus conditions, firmware behaviour, or other causes. You must not rely solely on the Product for safety-critical decisions, system protection, or legal compliance.

3.5 You are solely responsible for verifying that any installation and use of the Product is lawful in your jurisdiction, including any applicable registration, roadworthiness, electrical, building, or instrumentation requirements.

4.1 You must operate the Product only within the published specifications, including without limitation:

4.2 Operating the Product outside the specified supply voltage, current, temperature, or interface ratings may cause permanent damage and may void the Warranty to the maximum extent permitted by law.

4.3 Absolute maximum and transient conditions described in design documentation are design limits, not an invitation to operate at those extremes in normal use.

5.1 Revv Gauge recommends that the Product be installed by a qualified electrician or technician familiar with 12–24 V DC electrical systems.

5.3 Incorrect installation, reverse polarity (beyond protected limits), overcurrent, unsupported sensors, incorrect CAN wiring, or modification of the Product may cause damage to the Product, the host system, or other equipment, for which you accept responsibility to the maximum extent permitted by law.

6.1 An order placed through our website or authorised sales channel constitutes an offer to purchase. We may accept or reject an order at our discretion.

6.2 Prices are as displayed at the time of order unless otherwise agreed in writing. We may correct obvious pricing errors.

6.3 Title in the Product passes to you on receipt of cleared payment in full. Risk in the Product passes on delivery to you or your nominated carrier, unless otherwise required by law.

6.4 You are only entitled to Warranty benefits after all amounts owing in respect of the Product have been paid.

7.1 Delivery timeframes are estimates only and are not guaranteed.

7.2 You must provide accurate delivery details. We are not responsible for delays or loss caused by incorrect address information, refusal of delivery, or carrier events beyond our reasonable control.

7.3 International orders may be subject to customs duties, taxes, and import restrictions, which are your responsibility unless expressly stated otherwise.

8.1 Nothing in these Terms limits your rights under the Australian Consumer Law.

8.2 Change-of-mind returns, if offered, are at our discretion and may be subject to conditions published at the time of sale (including return shipping and restocking, where lawful).

8.3 Faulty goods claims are handled in accordance with the Australian Consumer Law and, where applicable, the Warranty.

9.1 The Product is supplied with a separate twelve (12) month limited Warranty against defects in materials and workmanship, subject to the exclusions and claim procedures set out in that Warranty.

9.2 Without limiting the Warranty, coverage may be declined where damage or failure results from misuse, incorrect installation, operation outside specifications, unsupported connections, unauthorised modification, or use contrary to these Terms (including use other than the intended use described in clause 3), to the maximum extent permitted by law.

10.1 Firmware and software supplied with the Product are licensed, not sold. You receive a limited, non-exclusive, non-transferable licence to use the software solely with the Product.

10.2 You must not reverse engineer, decompile, or modify the firmware except to the extent expressly permitted by law.

10.3 We may provide firmware updates from time to time. Updates may change features, fix defects, or alter behaviour. You are responsible for applying updates in accordance with our instructions. We do not guarantee uninterrupted or error-free operation.

11.1 All intellectual property in the Product, documentation, firmware, branding, designs, and related materials remains owned by Revv Gauge or its licensors.

11.2 Third-party components and open-source software included in the Product remain subject to their original licences and terms.

12.2 To the maximum extent permitted by law, our aggregate liability arising out of or in connection with the Product or these Terms is limited to the amount you paid for the Product giving rise to the claim, or, where the Australian Consumer Law requires, to repairing or replacing the Product or paying the cost of repair or replacement.

12.3 Where the Australian Consumer Law applies and liability cannot be excluded, our liability for a breach of a consumer guarantee is limited, to the extent permitted, to one or more of: replacement of the goods; repair of the goods; payment of the cost of replacing the goods; or payment of the cost of having the goods repaired.

14.1 If you acquired the Product for the purpose of resupply, the Warranty may not apply as stated in the Warranty document.

14.2 Sale of the Product via an online auction or unauthorised reseller may affect Warranty eligibility, as Revv Gauge has no control over storage, handling, quality, or safety of Products sold through such channels.

15.1 Revv Gauge is not liable for delay or failure to perform caused by events beyond our reasonable control, including acts of God, war, riots, strikes, epidemic, fire, flood, storm, changes in law or public policy, terrorism, supply-chain disruption, or carrier failure.

16.1 If you provide personal information when purchasing or contacting support, we will handle it in accordance with our privacy practices as published on https://revvgauge.com (or as otherwise notified to you).

17.1 We may update these Terms from time to time by publishing a revised version. The Terms in force at the time of your purchase apply to that purchase, unless a change is required by law.

17.2 Agents, officers, employees, distributors, and resellers are not authorised to vary these Terms unless agreed by Revv Gauge in writing.

18.1 If any provision of these Terms is illegal, unenforceable, or invalid, that provision is to be read down or severed to the minimum extent necessary, and the remaining provisions continue in full force.

19.1 These Terms are governed by the laws of Australia (and, where applicable, the State or Territory in which REVVGAUGE PTY LTD principally carries on business). The courts of that jurisdiction have non-exclusive jurisdiction, subject to any non-excludable consumer rights in your place of residence.